Xerox B210DNI User Manual page 71

Using the Xerox Easy Wireless Setup Program
When installing the printer, you can use the Xerox Easy Wireless Setup program that was automatically
installed with the printer driver to configure the wireless settings.
Note: Make sure the Xerox Easy Wireless Setup Program is installed on your computer, for
instructions, refer to
At the computer, click search and type Xerox Easy Wireless Setup.
1.
2. Connect the printer to your computer using the USB cable.
Note: During installation, the printer needs to be temporarily connected using the USB cable.
Note: You cannot use your printer on a wired and wireless network at the same time. If your
printer is currently connected to the network with an Ethernet cable, unplug the cable.
3. Select Next.
4. Once the printer is connected to the computer with the USB cable, the program searches for
WLAN data.
5. When the search is complete, the Select Wireless Network window displays. Select your network
from the list.
6. Follow the wizard instruction to install the printer.
The Wireless Network Security screen displays.
Enter your Network Password and select Next.
7.
8. When the Wireless Network Setup Complete page displays, select Finish.
Uninstalling the Windows Drivers
1. From the Start menu, select Xerox Printers
Xerox Printer Software window displays.
2. Select Next. The Select Software window displays.
3. Select the components you want to remove and then select Next.
4. When your computer asks you to confirm your selection, select Yes.
5. After the software is removed, select Finish.
Installing Drivers and Connecting to a Local Printer.
Uninstall Xerox Printer Software. The Uninstall

Installing Printer Software
Xerox B210 Printer
®
User Guide
71