Xerox B210DNI User Manual page 127

• TCP/IP and HTTP protocols must be enabled on the printer so that the printer web browser can be
accessed.
All configured network settings and installed options will be retained by the printer after the software
upgrade process.
Updating the Software
1. Access Xerox CentreWare
®
• To access Xerox
a Web browser, then in the address field, type the IP address of the printer. Press Enter or
Return.
Note: If you do not know the IP address of your printer, refer to
Printer.
• To access Xerox
computer, select System Preferences
Show Print Webpage.
2. Select Properties.
3. Select Maintenance.
4. Select Upgrade Management.
Note: If prompted to enter a user name and password, for information about logging in as an
administrator, refer to
Account.
Select the Upgrades enable check box.
5.
6. Select the Firmware Upgrade.
7. Select Browse or Choose File. Locate and select the software upgrade .hd file obtained earlier,
then select Open.
8. Select Install Software.
The firmware will now be verified and display information about processing the upgrade file.
9. Select OK.
The upgrade should take less than 10 minutes unless there are network issues.
Once the printer has completed the upgrade it will reboot automatically. The configuration report will
print (if enabled). Check the configuration report to verify that the software level has changed.
Internet Services:
®
CentreWare Internet Services from a Web browser, at your computer, open
® ®
CentreWare Internet Services from a Macintosh print driver, at your
® ®
Accessing the Xerox® CentreWare® Internet Services Administrator
Finding the IP Address of Your
Printers & Scanners

Managing the Printer
Options & Supplies. Select

Xerox B210 Printer
®
User Guide
127