Xerox B210DNI User Manual page 155

Symptoms
Toner specks
Dropouts
White Spots
Vertical lines
Background
Solutions
• The paper may not meet specifications; for example, the paper may be too
moist or rough. For details, refer to
• The transfer roller may be dirty. Clean the inside of your printer, refer to
the Printer.
• The paper path may need cleaning, refer to
If faded areas, generally rounded, occur randomly on the page:
• A single sheet of paper may be defective. Try reprinting the job.
• The moisture content of the paper is uneven or the paper has moist spots on its
surface. Try a different brand of paper. For details, refer to
• The paper is damaged. The manufacturing processes can cause some areas to
reject toner. Try a new ream or brand of paper.
• Set the correct paper type option. For details, refer to
• If these steps do not correct the problem, contact a service representative.
If white spots appear on the page:
• The paper is too rough and dirt from the paper falls to the inner areas of the
printer on to the transfer roller. Clean the inside of your printer, refer to
the Printer.
• The paper path may need cleaning, refer to
If black vertical streaks appear on the page the drum cartridge inside the printer has
probably been scratched. Remove the drum cartridge and install a new one, refer to
Replacing the Drum Cartridge.
If the amount of background shading becomes unacceptable:
• Change to a lighter weight paper. For details, refer to
• Check the environmental conditions: very dry conditions or a high level of
humidity (higher than 80% RH) can increase the amount of background
shading.
• Remove the old toner cartridge and install a new one, refer to
Toner Cartridge.
Supported Paper.
Cleaning the Printer.
Supported
Paper
Cleaning the Printer.
Supported
Xerox
®
Print-Quality Problems
Cleaning
Paper.
Tab.
Cleaning
Paper.
Replacing the
155
B210 Printer
User Guide