Table of Contents
Advertisement
300
4-5. Using the driving support systems
The vehicle height adjustment switch
■
can be used to change the mode when
The power switch is in ON mode.
System protection function
■
If the vehicle height is repeatedly increased
and decreased using the vehicle height
adjustment switch, etc., the system may not
operate temporarily.
Vehicle height control when
entering/exiting the vehicle
("Access Mode")
In order to improve the ease of enter-
ing and exiting the vehicle, the vehicle
height will increase automatically.
Enter control
If any of the following operations are
performed, the vehicle height will
increase automatically:
When the doors are unlocked using
the smart access system with
push-button start
When the doors are unlocked using
the wireless remote control and
then a door is opened.
The vehicle height will increase by approxi-
mately 1.2 in. (30 mm) from its normal
position.
The vehicle height may not increase, if the
vehicle height already reaches the
selected height.
The vehicle will return to its normal height
when the vehicle speed reaches approxi-
mately 12 mph (20 km/h).
Exit control
When "Select Parking Height" is set to
"High", the vehicle height will automati-
cally increase when the P shift position
LS500h_OM_(U)_1810
is selected and a door is opened.
1
Press
or
to select
2
Press
or
to select "Vehicle
Settings" and then press
3
Press
or
to select
and then press
.
4
Press
or
to select "Select
Parking Height" and then press
.
The vehicle height will increase by approxi-
mately 0.4 in. (10 mm) from its normal
position.
The vehicle height may not increase, if the
vehicle height already reaches the
selected height.
The vehicle will return to its normal height
when the vehicle speed reaches approxi-
mately 12 mph (20 km/h).
Enabling/Disabling access mode
■
1
Press the
or
switch to select
.
2
Press the
or
switch to select "Vehicle Settings"
and then press
.
3
Press the
or
switch to select
press
.
4
Press the
or
switch to select "Access Mode"
and then press
.
The setting will change between
enabled/disabled each time the
.
.
meter control
meter control
meter control
and then
meter control
Advertisement
Table of Contents
