Table of Contents
Advertisement
336
5-3. Using the air conditioning system and defogger
2
To stop the operation, select "Rear
off" on the sub function menu.
(P.334)
If the fan speed setting or air flow
modes are operated, the automatic
mode indicator goes off. However,
automatic mode for functions other
than that operated is maintained.
Rear Multi Operation Panel
1
Select "AUTO" on the rear air con-
ditioning control screen. (P.335)
2
To stop the operation, select "OFF"
on the rear air conditioning control
screen. (P.334)
If the fan speed setting or air flow
modes are operated, the automatic
mode indicator goes off. However,
automatic mode for functions other
than that operated is maintained.
Using automatic mode
■
Fan speed is adjusted automatically accord-
ing to the temperature setting and the
ambient conditions.
Therefore, the fan may stop for a while until
warm or cool air is ready to flow immedi-
ately after "Rear AUTO" is selected or
"AUTO" is touched.
Cool air may blow around the upper body
even when the heater is on due to sunlight.
Adjusting the temperature set-
ting of the rear seats
The temperature setting of the rear
seats can be adjusted using the follow-
ing methods:
When the "4-ZONE" indicator is
off: Adjust the driver's seat tempera-
ture.
LS500h_OM_(U)_1810
Adjust the temperature setting of each
rear seat using the Center Display or Rear
Multi Operation Panel.
Adjust the temperature setting of
each rear seat using the Center Dis-
play (rear air conditioning control
screen) or Rear Multi Operation
Panel.
The temperature setting of each rear seat
can be changed independently.
Air outlet layout and operations
Rear center outlets and rear side
■
outlets
1
Direct air flow to the left or right, up
or down
2
Turn the knob to open or close the
vent
NOTICE
■
To prevent 12-volt battery discharge
Do not leave the air conditioning system
on longer than necessary when the
hybrid system is off.
Advertisement
Table of Contents
