IBM ThinkPad 755CX Manual page 61

Note:
For more information about the
startup sequence, see "Using the
Selectable Drive-Startup Sequence"
on page 47.
Note:
The FDD-1 and HDD-1 icons
represent the diskette drive and
hard disk drive of the computer,
respectively. Other numbered icons
are the diskette drive and hard disk
drives of external devices.
Start up is used to change the startup sequence of your computer.
1 2 3
Start
The HDD-1 icon represents the internal hard disk drive of the
computer. The other numbered HDD icons are the hard disk drives
of external devices. FDD-1 represents the first diskette drive found
during system startup. When no diskette drive is installed and the
attached expansion unit (Dock I or II) has a diskette drive, the
diskette drive in the Dock I or Dock II will be the first drive.
Select Test to test the computer hardware.
Test
For more information, see "Testing the Computer" on page 202.
3 4
HDD-3 HDD-4
PCMCIA
Start
1
1
SystemBoard Memory Display HDD-1 FDD-1
2 2
Serial DSP CD-ROM HDD-2 FDD-2 PCMCIA-2
Chapter 3. Operating Your Computer
Using Easy-Setup
Restart
1
Parallel
PCMCIA-1
2
45