Installing For Windows - IBM ThinkPad 755CX Manual

Installing the ThinkPad Features Program
PS2 command:
Page 41.
182
IBM ThinkPad 755CX User's Guide

Installing for Windows

WIN
If you are going to use Windows, install the ThinkPad Features
program for DOS first (see page 181); then do the following to
install the ThinkPad Features program for Windows.
1
Turn on the computer and start Windows.
2
Select File from the Program Manager window; then
select Run... from the pull-down menu.
3
Insert the Utility Diskette into the diskette drive.
4
Type A:\INSTALLW; then press Enter.
Follow the instructions on the screen.
You have completed the installation of the ThinkPad Features
program.
Using PS2 command in the Windows Environment
To use the PS2 command in the DOS session of Windows, install the
program at the DOS full screen. (See page 181.)
Go to "Installing the PCMCIA Device Driver" on page 183.
Program
Options Windows Help
File
New...
Enter
Open
Move... F7
Copy... F8
Delete... Del
Properties... Alt+Enter
Run...
Exit