IBM ThinkPad 755CX Manual page 245

System Resources IRQ
Options in Dock I or 2, 3, 4, 5, 7, 9,
Dock II 10, 11, 15
SCSI controller
AD/VC adapter None
Notes:
Selected values are assigned to a serial port and a parallel port of the computer.
Selectable in the ThinkPad Features program or PS2 command.
VL-Bus master is used.
The IRQ for PC Card depends on the PC Card type.
Selectable in the Resource Map Utility program. See "Software Considerations for DOS" on page 235.
Select an IRQ and the memory addresses with a jumper and switch on the main board of Dock I/Dock II.
See the Dock I User's Guide or Dock II User's Guide . Do not select Disabled when OS/2 is used.
The 755CX SVGA model does not support this option.
Memory
Address (Hex) I/O Address (Hex)
CA000–CBFFF (Depends on the installed
C8000–C9FFF option device)
CE000–CFFFF
DE000–DFFFF
None 92E9
Appendix A. Avoiding Hardware Conflicts
Avoiding Hardware Conflicts
DMA
Channel
0, 1, 2,
3, 5, 6, 7
None
229