Changing A Hard-Disk Password - IBM ThinkPad 755CX Manual

Using the Passwords

Changing a Hard-Disk Password

Note:
To make the hard-disk password
the same as the power-on
password, you must change the
power-on password, see "Changing
a Power-On Password" on
page 112.
116
IBM ThinkPad 755CX User's Guide
The procedure to change a hard-disk password depends on whether
or not it is set the same as the power-on password.
When the hard-disk password is set the same as the power-on
password, remove the hard-disk password by following the
steps in "Removing a Power-On Password" on page 113. The
hard-disk password is removed when you remove the power-on
password. After that, reset the hard-disk password. If the
power-on password is needed, reset it also.
When the hard-disk password and the power-on password are
different, or the power-on password has not been set:
1
Turn off the computer and wait at least 5 seconds; then
turn it on.
2
If you have set a power-on password, type it; then press
Enter.
3
When the hard-disk password prompt (
type your current hard-disk password; then press the
Spacebar.
4
Type the new password; then press the Spacebar.
Use no more than seven characters.
5
Type the new password again for verification; then press
Enter.
Do Not Forget Your Hard-Disk Password
Note the password and keep it in a safe place.
If you forget your hard-disk password, there is no way to reset it
or recover data in the hard disk drive. Neither IBM authorized
reseller nor IBM marketing representative can make the hard disk
drive usable.
) appears,