Step 4.
Install the M.2 backplane onto the chassis.
Figure 54. M.2 backplane installation
a.
Align the notch of the M.2 backplane with the pin on the chassis, and then place down the
M.2 backplane.
b.
Tighten the screw to secure the M.2 backplane.
Step 5.
Install the M.2 drive on the M.2 backplane.
Figure 55. M.2 drive installation
a.
Insert the M.2 drive at an angle of approximately 30 degrees into the connector.
b.
Rotate the M.2 drive down until the notch
c.
Slide the retainer forward (toward the connector) to secure the M.2 drive into place.
Step 6.
Connect the cables to the M.2 backplane and processor board. See
164.
After you finish
ThinkSystem SR645 V3 User Guide
88
catches on the lip of the retainer
1
"M.2 drive backplane" on page
.
2