Lenovo ThinkSystem SR645 V3 User Manual page 44

Configure the system
Complete the following procedures to configure the system. For detailed instructions. Refer to
"System configuration" on page
1. Set the network connection for the Lenovo XClarity Controller to the management network.
2. Update the firmware for the server, if necessary.
3. Configure the firmware for the server.
The following information is available for RAID configuration:
•
https://lenovopress.com/lp0578-lenovo-raid-introduction
•
https://lenovopress.com/lp0579-lenovo-raid-management-tools-and-resources
4. Install the operating system.
5. Back up the server configuration.
6. Install the applications and programs for which the server is intended to be used.
ThinkSystem SR645 V3 User Guide
34
177.
Chapter 7