Lenovo ThinkSystem SR645 V3 User Manual page 122

• Read "Installation Guidelines" on page 35
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Notes:
• See https://static.lenovo.com/us/en/serverproven/index.shtml
server. All processors on the system board (system board assembly) must have the same speed, number
of cores, and frequency.
• Before you install a new processor or replacement processor, update your system firmware to the latest
level. See "Update the firmware" on page
Firmware and driver download: You might need to update the firmware or driver after replacing a
component.
• Go to
https://datacentersupport.lenovo.com/tw/en/products/servers/thinksystem/sr645v3/7d9c/downloads/
to see the latest firmware and driver updates for your server.
driver-list/
• Go to "Update the firmware" on page 177
Watch the procedure
A video of this procedure is available at YouTube:
CTkyVDu-5Lhy1r9G-4PQGl
Procedure
Step 1. (Optional) If a processor filler is installed on the processor socket, remove the processor filler.
Figure 73. Removing a processor filler
ThinkSystem SR645 V3 User Guide
112
and "Safety inspection checklist" on page 36
44.
177.
for more information on firmware updating tools.
.
for a list of processors supported for your
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
to ensure that you