Procedure
Step 1.
Remove the top cover. See
Step 2.
Install the power-supply-unit air duct.
Figure 68. Power-supply-unit air duct installation
a.
Align the screw holes on the air duct and the chassis, and put the air duct down.
b.
Tighten the screw and ensure that the air duct is secured in place.
After you finish
• Properly route and secure the cables in the server. Refer to detailed cable routing information for each
component in
Chapter 6 "Internal cable routing" on page
• Complete the parts replacement. See
ThinkSystem SR645 V3 User Guide
106
"Remove the top cover" on page
157.
"Complete the parts replacement" on page
150.
154.