Lenovo ThinkSystem SR645 V3 User Manual page 199

Location of the external diagnostics handset
Location
The external diagnostics handset is connected to the
server with an external cable.
Note: When unplugging the external handset, see the following instructions:
Press the plastic clip on the plug forward.
Hold the clip and remove the cable from the connector.
Display panel overview
The diagnostics device consists of an LCD display and 5 navigation buttons.
Callouts
External diagnostics handset
1
Magnetic bottom
2
With this component, the diagnostic handset can be
attached to the top or side of the rack with hands spared
for service tasks.
External diagnostics connector
3
This connector is located on the front of the server, and is
used to connect an external diagnostics handset.
Chapter 8
.
Problem determination
189