Table of Contents
Advertisement
10. Exit from ServeRAID Manager and remove the CD from the CD-RW/DVD
11. Restart the server.
Viewing the configuration: You can use ServeRAID Manager to view information
about RAID controllers and the RAID subsystem (such as arrays, logical drives,
hot-spare drives, and physical drives). When you click an object in the ServeRAID
Manager tree, information about that object appears in the right pane. To display a
list of available actions for an object, click the object and click Actions.
Using the Remote Supervisor Adapter II Web interface
The Remote Supervisor Adapter II Web interface is a graphical user interface that
you can use to perform many of the tasks that were previously only available
through the Configuration/Setup Utility program. The Remote Supervisor Adapter II
Web interface is in the Remote Supervisor Adapter II integrated service processor
and is accessed using a Web browser on the administrator console or another
computer that is connected to the server through the serial connector on the rear of
the server.
Before you use the Remote Supervisor Adapter II Web interface, read the following
information:
v A Remote Supervisor Adapter II SlimLine must be installed in the server.
v You must have a Web browser to access the Web interface.
v You must know the IP address or the host name of the Remote Supervisor
v You can find the IP address and the host name in the Configuration/Setup Utility
v You can connect directly to the server or use an Ethernet network to access the
v You must connect one of the following cables:
9. Click Apply; when you are asked whether you want to apply the new
configuration, click Yes. The configuration is saved in the controller and in the
physical drives.
drive.
Adapter II SlimLine that you are connecting to.
program or from your network administrator.
service processor and the Remote Supervisor Adapter II Web interface.
– Crossover cable from the serial connector to a computer.
– An Ethernet cable that is connected to an Ethernet network.
Chapter 2. Configuration information and instructions
23
Advertisement
Table of Contents
