Roland Texart RT-640 Setup Manual page 37


After this, the next step is to adjust the feed adjusters. This procedure will be performed by a Roland
DG service technician, so leave it up to them.
 For information on how to install the take-up system, refer to the take-up system user's manual.
 If using the TUC-3, it is necessary to make adjustments by removing springs and other parts from
the control box and frame of the TUC-3. For details, refer to the TUC-3 User's Manual.
refer to TUC-3 documentation.
 It is recommended that you use the BACKWARD setting when using the take-up unit with the
machine.
5. Filling with Ink
For details,
35