Step 2: Make The Network Settings On The Machine - Roland Texart RT-640 Setup Manual

6. Network Settings

Step 2: Make the Network Settings on the Machine

1.
Set the IP address.
MENU
SYSTEM INFO.
SYSTEM INFO.
NETWORK
2.
Set the subnet mask.

NETWORK
IP ADDRESS
NETWORK
SUBNET MASK

Press
If you use the computer and the machine one-on-one basis, this will complete the settings to make on the ma-
chine. Go on to Step 3. If you need to set the gateway address, then go on to the procedure following this one.
38
NETWORK
IP ADDRESS
IP ADDRESS
000.000.000.000
IP ADDRESS
192.168.000.XXX
SUBNET MASK
000.000.000.000
SUBNET MASK
255.255.255.000
to go back to the original screen.
[IP ADDRESS]:
192.168.000.XXX
Here, "XXX" can be any number
between 1 and 254. For the part
corresponding to "192.168.000,"
apply the same value as the set-
ting of your computer.
：Select address number
：Move to the next address
Make the setting the same
value as the one used by the
computer at step 1.
：Select address number
：Move to the next address