Accessing Regions - Magellan RoadMate 360 Reference Manual

Selecting Destinations

Accessing Regions

When you first start-up your Magellan RoadMate, you were asked to select a default region. This region is one you
travel within most often. By having only one region active, the time it takes to search for an address is greatly
decreased. If you have selected more than one active region, when you search for an address, you will be asked to
narrow down the search by selecting which active region the address is in. If the address you are searching for is not
within any active region, you can select the Globe button to activate the region you wish to search from.
Select the Globe.
A dialog box will appear with the active region status. Select Yes.
Next you will need to decide on which regions you travel within most often. Select
OK to proceed to the next screen.
Selecting only one region will greatly speed up the time it takes to search for
addresses and POIs. Select OK to proceed to the next screen or, select Back to
view the previous screen. If you do not wish to view this screen each time you
select a map region, select Don't Show Again.
Select the geographical area.
19