Table of Contents
Advertisement
Chapter 8: Selecting Destinations
Exclude
The details for the maneuver are displayed. Select
.
The trip will be re-calculated, excluding the maneuver selected. This calculation is done using
the same Route Method that was chosen when the destination was selected.
8.6 Accessing Regions
When you first start-up your Magellan RoadMate, you were asked to select a default region. This region is one you travel
within most often. By having only one region active, the time it takes to search for an address is greatly decreased. If you
have selected more than one active region, when you search for an address, you will be asked to narrow down the search by
selecting which active region the address is in. If the address you are searching for is not within any active region, you can
select the Globe button to activate the region you wish to search from.
Select the
Globe
.
Yes
A dialog box will appear with the active region status. Select
.
OK
Next you will need to decide on which regions you travel within most often. Select
to
proceed to the next screen.
23
Advertisement
Table of Contents
