Mackie X.200 User Manual page 27

• Using this list, it is possible to regress to any
point in the mix. If at some point things went
in the wrong direction, it is easy to go back to
where the mix was on the right track.
• Highlight any item in the list to deactivate all
forthcoming listed actions. When the mix is
played, no actions listed below the selected
event will occur.
• If an event is selected in the list and then a
change is made in the Mix Editor, all events fol-
lowing the selection will be replaced by the new
event.
• Use the Undo command from the Edit menu
(Ctrl+Z) to regress through the History List
steps one at a time.
• Use the Clear History command from the Edit
menu to remove all events from the History
List. This action cannot be undone.
• Removes all items from the History window.
• This action cannot be undone.
• Copies the current L/R mix to a pair of buses.
• Selections include Bus 1 and 2, Bus 3 and 4,
Bus 5 and 6, or Bus 7 and 8.
• Check "Unassign from LR Mix" to remove the
selected channels from the L/R Mix and copy to
the selected bus pair.
The Channel menu contains:
Channel Settings (Ctrl+B)
Channel Presets
Setup Groups (Ctrl+G)
Un-Group
Link Channels... (Ctrl+L)
UnLink Channels (Ctrl+U)
Faders to Unity (Ctrl+])
Faders to Off (Ctrl+[)
Adjust Channel Delay...
Reset Channel Delay...
Reset Selected Channels
Select Fader Bank (Alt+A)
Select All Faders (Alt+Shift+A)
• Allows for quick and easy setting of global
channel parameters.
• Change the channel name.
• Easily set groups.
• Solo isolate channels.
• Quickly set channel links.
• Allows you to save and open preset channel
parameter settings.
• Click New to create a new channel preset. Enter
the new name using the keyboard or on-screen
keyboard.