Section 2: Unpacking And Inspection; General; Required Tools; Unpacking - Generac Power Systems PWRgenerator 9 kW Installation Manuallines

Section 2: Unpacking and Inspection

General

NOTE: Carefully inspect contents for damage after
unpacking. Unpack and inspect unit immediately upon
delivery to identify any damage which may have occurred
in transit. Any claims for shipping damage need to be
filed as soon as possible with freight carrier. This is espe-
cially important if unit will not be installed for a period of
time.
•
This standby generator is ready for installation with
a factory supplied and pre-mounted base pad and
has a weather protective enclosure intended for
outdoor installation only.
•
If any loss or damage is noted at time of delivery,
have delivery person(s) note all damage on the
freight bill, or affix their signature under consignor's
memo of loss or damage.
•
If a loss or damage is noted after delivery, separate
damaged materials and contact freight carrier for
claim procedures.
•
"Concealed damage" is understood to mean dam-
age to contents of a package not evident at time of
delivery, but discovered later.

Required Tools

•
General SAE and Metric hand tools
– Wrenches
– Sockets
– Screwdrivers
•
Standard electrician's hand tools
– Drill and bits for mounting and routing conduits
•
4 mm hex key (for access to customer connec-
tions)
•
3/16 in hex key (test port on fuel regulator)
•
Manometer (for fuel pressure checks)
•
Meter capable of measuring DC voltage
•
Torque wrenches
Installation Guidelines for PWRgenerator Air-Cooled Generators

Unpacking

Proceed as follows to unpack unit:
1. Remove outer shipping carton.
2. See Figure 2-1. Remove wood frame.
Figure 2-1. Crated Generator
3. See Figure 2-2. Lid will be locked. A set of keys is
attached to the cardboard sheet on top of unit. An
additional set is attached to the pallet bracket on
the front intake end of the generator. Remove keys
from cardboard and pallet bracket.
Figure 2-2. Keys As Shipped
NOTE: The enclosed keys provided with this unit are
intended for service personnel only.
Unpacking and Inspection
000427
000427
006729
006729
7