Rear Cover; Removing The Rear Cover; Installing The Rear Cover - Dell PowerEdge XR4000r Installation And Service Manual

Next steps
1. Install the front bezel.
2. Follow the procedure listed in

Rear cover

Removing the rear cover

Prerequisites
Follow the safety guidelines listed in the
Steps
1. Using the Torx #8 screwdriver, remove the screws that secures the rear cover on to the chassis.
2. Pull the rear cover to disengage from the chassis.
Figure 22. Removing the rear cover
Next steps
Replace the rear cover.

Installing the rear cover

Prerequisites
Follow the safety guidelines listed in the
Steps
1. Align and insert the cover on the rear of the chassis.
2. Using the Torx #8 screwdriver, tighten the screws that secures the rear cover on to the chassis.
34 Installing and removing system components
After working inside your system.
Safety instructions.
Safety instructions.