Table of Contents
Advertisement
Steps
1. Pull the blue lever on the sled to free the sled handle.
2. Holding the sled with both hands, align the sled along the sled-bay in to the chassis.
3. Slide the sled into the chassis, ensure the sled handle is in lock position.
4. Push the sled handle inwards so that it locks into place and secures the sled in the chassis.
NOTE:
The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
Figure 20. Installing a 1U sled into XR4000r
Figure 21. Installing a 2U sled into XR4000r
Installing and removing system components
33
Advertisement
Table of Contents
