Siemens SIMATIC S7-300 Getting Started page 13

Step Activity
3
Confirm with "OK".
Result: In the project a new SIMATIC 300 station is set up with a CPU 317T-2 DP (latest version).
4 Open the hardware configuration and insert a digital input and a digital output module as described in the
learning unit "2nd step".
5 Download the hardware configuration to the target system as described in learning unit "3rd step".
6 Skip the next learning units and continue with learning unit "6. Step: Configuring the drive with HW Config
(Page 18)".
CPU 317T-2 DP: Controlling a physical axis
Getting Started, 03/2008, A5E00251786-05
3.2 Optionally: Setting up the T station with the help of the wizard
Learning units
13