Digital Pcb; Bottom Cover - Denon HEOS AVR Service Manual

4. DIGITAL PCB

Proceeding : REAR PANEL and TOP PANEL → SIDE PANEL → FRONT PANEL ASSY
→ DIGITAL PCB
(1) Remove the screws.
(2) Remove the screws. Cut the wire clamps. Remove the connector.
CN305
(3) Cut the wire clamps. Remove the connector.
Make sure that the black PC SHEET does not catch on the HEAT SINK during assembly.
x2
x3 x1
x2 x2
CN32A CN303
CN31A
CN502
CUTx7
LED COVER
CUTx2

5. BOTTOM COVER

Proceeding : REAR PANEL and TOP PANEL → SIDE PANEL → FRONT PANEL ASSY
→ DIGITAL PCB →
(1) Remove the screws. Remove the REMOTE PCB.
REMOTE PCB
(2) Remove the screws.
There is mounting direction
6. SMPS PCB
Proceeding : REAR PANEL and TOP PANEL → SIDE PANEL → FRONT PANEL ASSY
DIGITAL PCB →
→
See "EXPLODED VIEW" for instructions on removing the SMPS PCB.
7. D-AMP PCB
Proceeding : REAR PANEL and TOP PANEL → SIDE PANEL → FRONT PANEL ASSY
DIGITAL PCB →
→
See "EXPLODED VIEW" for instructions on removing the D-AMP PCB.
42
BOTTOM COVER
x8
x6
x4
SMPS PCB
D-AMP PCB