Denon HEOS AVR Service Manual page 40

DISASSEMBLY
Flowchart
• Remove each part following the flow below.
• Reassemble the removed parts in the reverse order.
• Read "SAFETY PRECAUTIONS" before reassembling the removed parts.
• If wire bundles are removed or moved during adjustment or part replacement, reshape the wires after completing the work. Failure to shape the wires correctly may cause problems such as noise.
• See "EXPLODED VIEW"
REAR PANEL and TOP PANEL
DISASSEMBLY
1. REAR PANEL and TOP PANEL
and "EXPLODED VIEW"
REAR PANEL
Ref. No. of EXPLODED VIEW : T 1-5
TOP PANEL
Ref. No. of EXPLODED VIEW : T 1-1
SIDE PANEL
DISASSEMBLY
2. SIDE PANEL
and "EXPLODED VIEW"
SIDE PANEL L
Ref. No. of EXPLODED VIEW : M 13
SIDE PANEL R
Ref. No. of EXPLODED VIEW : M 14
FRONT PANEL ASSY
DISASSEMBLY
3. FRONT PANEL ASSY
and "EXPLODED VIEW"
ENCODER & BLUE COLOR LED PCB
Ref. No. of EXPLODED VIEW : P 1
DIGITAL PCB
DISASSEMBLY
4. DIGITAL PCB
and "EXPLODED VIEW"
DIGITAL PCB
Ref. No. of EXPLODED VIEW : P 7
LEGO MODULE
Ref. No. of EXPLODED VIEW : P 6
40
BOTTOM COVER
DISASSEMBLY
5. BOTTOM COVER
and "EXPLODED VIEW"
BOTTOM COVER
Ref. No. of EXPLODED VIEW : M 2
REMOCON SENSOR PCB
Ref. No. of EXPLODED VIEW : P 3
SMPS PCB
DISASSEMBLY
6. SMPS PCB
and "EXPLODED VIEW"
SMPS PCB
Ref. No. of EXPLODED VIEW : P 4
D-AMP PCB
DISASSEMBLY
7. D-AMP PCB
and "EXPLODED VIEW"
D-AMP PCB
Ref. No. of EXPLODED VIEW : P 5