Wiring 2-path systems
Figure 5-3
5.2
Wiring output and power supply
①
②
③
Figure 5-4
1. Release the lid of the terminal box by turning the 3 mm hexagon socket screw.
2. Unscrew the lid.
3. Push the power cable and signal cable through the cable glands up to the terminal block.
SITRANS FUS060 with HART
Operating Instructions, 09/2021, A5E01204521-AL
Wiring transducer cables, 2-path system
Lid of terminal box
Cable gland
PE connector - between the cable glands
FUS060 with layed cables
5.2 Wiring output and power supply
Connecting
33