Table of Contents
Advertisement
OnChip IDE Function
Please refer to section 3-7-1
OnChip Device Function
Please refer to section 3-7-2
OnChip SIO Function
Please refer to section 3-7-3
Init Display First
This item allows you to decide to activate whether PCI Slot or on-chip VGA first. The
settings are: PCI Slot, AGP Slot, On-Chip VGA.
3-7-1 On-Chip IDE Function
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
OnChip IDE Channel 0
OnChip IDE Channel 1
Primary Master
Primary Slave
Secondary Master PIO
Secondary Slave
Primary Master
Primary Slave
Secondary Master UDMA
Secondary Slave
IDE DMA Transfer Access
IDE Prefetch Mode
IDE HDD Block Mode
Delay For HDD (Secs)
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
OnChip IDE Channel 0/Channel 1
The integrated peripheral controller contains an IDE interface with support for two IDE
channels. Select Enabled to activate each channel separately. The settings are: Enabled and
Disabled.
Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of
the four IDE devices that the onboard IDE interface supports. Modes 0 through 4 provide
successively increased performance. In Auto mode, the system automatically determines the
best mode for each device. The settings are: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode
4.
On-Chip IDE Function
Enabled
Enabled
PIO
Auto
PIO
Auto
Auto
PIO
Auto
UDMA
Auto
UDMA
Auto
Auto
UDMA
Auto
Enabled
Enabled
Enabled
0
F6:Optimized Defaults
Menu Level >>
F7:Standard Defaults
27
Item Help
F1:General Help
Advertisement
Table of Contents
