Siemens SIMATIC NET ET 200SP Operating Instructions Manual page 102

Approvals
DE-76181 Karlsruhe
Germany
You will find the EC Declaration of Conformity on the Internet at the following address:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/)
> Certificate type: "EC declaration of conformity"
IECEx
The product meets the requirements of explosion protection according to IECEx.
IECEx classification:
● Ex ec IIC T4 Gc
Certificate: IECEx DEK 18.0017X
Applied standards:
– EN 60079-0 - Explosive atmospheres - Part 0: Equipment - General requirements
– EN 60079-7 - Explosive Atmospheres - Part 7: Equipment protection by increased
You can see the current versions of the standards in the IECEx certificate that you can find
on the Internet at the following address:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/)
The conditions must be met for safe usage of the product according to the section Notes on
use in hazardous areas according to ATEX / IECEx (Page 41).
You should also note the information in the document "Use of subassemblies/modules in a
Zone 2 Hazardous Area" that you can find on the Internet at the following address:
Link: (https://support.industry.siemens.com/cs/ww/en/view/78381013)
ATEX
The product meets the requirements of the EU directive 2014/34/EU "Equipment and
protective systems intended for use in potentially explosive atmospheres".
ATEX approval:
● II 3 G Ex ec IIC T4 Gc
Type Examination Certificate: DEKRA 18 ATEX 0025X
Applied standards:
– EN 60079-0 - Explosive atmospheres - Part 0: Equipment - General requirements
– EN 60079-7 - Explosive Atmospheres - Part 7: Equipment protection by increased
102
safety 'e'
safety 'e'
Operating Instructions, 12/2019, C79000-G8976-C426-05
CP 154xSP-1