Table of Contents
Advertisement
WHAT?
HOW?
HOW OFTEN?
1. Wipe dry with a soft cloth. Note:
Drip tray under
1. Remove oven door.
door (OR36
2. Wipe with a damp cloth and a solution of hot water and mild detergent.
models only)
CookTop Parts
1. Check that the burner is turned
2. Lift off the burner cap and brass
3. Wash them in hot soapy water,
Aluminum and
enamelled
Burner caps
and flame
4. Replace the flame spreader and
spreaders
Brass burner parts only:
For extra shine and to remove tarnish
use a suitable brass cleaner and
polish, following manufacturer's
instructions.
https://producthelp.fisherpaykel.com/us/Cook/Ranges/Dual_Fuel/OR30SCG6R1/User_Guide_OR30SCG6R1/07_Care_and_...
solution of hot water and mild
detergent.
the drawer may be removed to
make cleaning easier.
OFF and allow it to cool.
flame spreader.
rinse, and dry.
◦ Use a stiff nylon brush or
straightened paper clip to
clear the notches of the
flame spreader.
burner cap correctly. See
'Replacing the burner parts'.
IMPORTANT!
and stubborn, we recommend removing any
easy-to-reach spills, food or greasy stains
from the enamel after each use.
• Keep the notches of the flame spreaders
clear. Soiling may clog these and cause
ignition problems.
• Before replacing the burner parts, check that
they are dry. Wet burner parts may result in
an irregular flame.
• Before lighting a burner you have
reassembled, check that all of its parts are
positioned correctly. Incorrect assembly can
cause dangerous irregular flames and ignition
problems.
• Do not put any burner parts in the dishwasher
as they will become discolored.
Updated: Sat, 09 Jul 2022 14:42:33 GMT
Powered by
5
Advertisement
Table of Contents
