Serial Port Connector: Jcom2; Cpu Support Jumper: Jp1 - MSI MS-7095 Instruction Manual

1.1, and is ideal for connecting high-speed USB interface peripherals such as USB HDD, digital
cameras, MP3 players, printers, modems and the like.

Serial Port Connector: JCOM2

The mainboard offers another serial port JCOM2. It is 16550A high speed
communication port that sends/receives 16 bytes FIFOs. The MSI JCOM2
cable is optional.
PIN SIGNAL
1 DCD
3 SOUT
5 GND
7 RTS
9 RI
Clear CMOS Jumper: JBAT1
There is a CMOS RAM on board that has a power
supply from external battery to keep the system
configuration data. With the CMOS RAM, the system can automatically boot OS every time it is
turned on. If you want to clear the system configuration data, use the JBAT1 (Clear CMOS
Jumper) to clear data. Follow the instructions below to clear the data:
MSI Reminds You...
You can clear CMOS by shorting 2-3 pin while the system is off. Then return to 1-2 pin position.
Avoid clearing the CMOS while the system is on; it will damage the mainboard.

CPU Support Jumper: JP1

This jumper specifies the mainboard's support for
locked or some unlocked CPU.
DESCRIPTION
Data Carry Detect
Receive Data Transmit
Data
Request To Send Ring
Indicate
PIN SIGNAL DESCRIPTION
2 SIN Serial in or receive data
4 DTR Serial out or transmit data
6 DSR Data Set Ready
8 CTS Clear To Send
10 X X
1
1
10
2
1
9 10
3
1
Keep Data Clear Data
(Default)
3
1
Locked CPU Unlocked CPU
(Default)
3
1
3
1