MSI Reminds You...
If the audio signals coming from the Center and Subwoofer
speaker are swapped when you play video or music on the
computer, a converter may be required to exchange center and
subwoofer audio signals. The converter can be purchased from
a speaker store.
Using the Optional S-Bracket
S-Bracket is an optional accessory. It gives access to analog and digital
audio output by integrating both SPDIF (Sony & Philips Digital Interface) and
analog LINE OUT connectors. To use the S-Bracket, you should select correct
setting in the software utility. For information about the setting, refer to Se-
lecting 2-, 4- or 6-Channel Setting later in the section.
Connector configurations for 2-, 4- and 6-channel using S-Bracket are
described below:
2-Channel Analog Audio Output
We recommend that you should still attach the speakers to BACK PANEL's
Line Out connector during 2-channel audio mode even though S-Bracket's
Line Out connectors function properly.
1
MIC
2
Line Out (Front channels)
3
Line In
4
Coaxial SPDIF jack
Using 4- or 6-Channel Audio Function
Back Panel
2
4
3
1
A-13