Using The Back Panel Only - MSI MS-6799 User Manual

Using 2-, 4- & 6- Channel Audio Function
After installing the audio driver, you are able to use the 4-/6-channel
audio feature now. To enable 4- or 6-channel audio operation, first connect 4 or
6 speakers to the appropriate audio connectors, and then select 4- or 6-channel
audio setting in the software utility.
There are two ways to utilize the function and connect the speakers to
your computer:

Using the back panel only

If you do not have a S-Bracket, you can connect all speakers to the
audio connectors on the back panel.
Using the optional S-Bracket
If your motherboard supports S-Bracket and you have installed S-
Bracket in the computer, you can connect two speakers to back
panel's Line-Out connector, and the rest of speakers to S-Bracket.
Using the Back Panel only
Connecting the Speakers
When you have set the Multi-Channel Audio Function mode properly in
the software utility, connect your speakers to the correct phone jacks in
accordance with the setting in software utility.
2-Channel Mode for Stereo-Speaker Output
Refer to the following diagram and caption for the function of each
phone jack on the back panel when 2-Channel Mode is selected.
1 Line In
2 Line Out (Front channels)
3 MIC
4 Coaxial SPDIF jack
Using 4- or 6-Channel Audio Function
Back Panel
4
1
2
3
A-11