Bluetooth Operation; Auxiliary Input Operation - Jensen JBS-300 User Manual

Wall mountable bluetooth music system with cd

Hide thumbs Also See for JBS-300:

User manual (14 pages)

Table Of Contents

Table of Contents

In Off (standby) mode, press the

the remote control to turn the unit ON and follow the directions below to connect via Bluetooth.

PAIRING (Linking) a BLUETOOTH ENABLED cell phone OR OTHER BLUETOOTH

ENABLED DEVICE to the JBS-300

If the JBS-300 has never been paired with a Bluetooth device before, you need to follow the

pairing instructions below to link the JBS-300 with your Bluetooth device.

In Off (standby) mode, press the

on the remote control to turn the unit ON.

Tap the FUNCTION Button on main unit repeatedly or

select Bluetooth mode, "No CoNN" message running and Bluetooth icon appear in LCD

display. JBS-300 is in search mode

If the JBS-300 has never been paired with a Bluetooth device before or cannot find the last

paired device, the running message "No CoNN" on LCD will indicate the JBS-300 is in search

mode. You need to follow the pairing instructions below to link the JBS-300 with your

Bluetooth device.



Turn on the Bluetooth function of your Bluetooth device and enable the search or scan

function to find the JBS-300.



Select "JBS-300" from the device list when it appears on your device screen. If required,

enter the pass code "0000" to pair (link) the JBS-300 with your device.

After successfully pairing (linking), display will change to show "CoNN" steadily, the Bluetooth

icon also will show in display. You can begin playing music from your Bluetooth device

wirelessly to the speaker.

After selecting your favorite song, press PLAY/PAUSE

control to play or pause the song.

Press the volume control on main unit or remote control to adjust to the desired volume level.

Press

If you want to pair the JBS-300 with another Bluetooth enabled device, press and hold the

Button for 2 seconds or turn off the Bluetooth function of device currently paired with JBS-300

then repeat step 3 above.

Notes:

1.) Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth enabled

devices for Bluetooth operation since it may vary from model to model.

2.) If your Bluetooth enabled device does not support A2DP profile, it will not play the music

through the speaker, even if paired (linked).

3.) If you are pairing (linking) your computer to the unit using Bluetooth, you may need to set the

speaker as your computer's default sound device.

This unit features an auxiliary audio signal input jack for connecting external audio devices like

MP3 players, Digital Audio Device and listen to them through the speakers of this unit.

Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the cable.

Plug one end into the AUDIO IN JACK on main unit and the other end of the cable into the

Line-out Jack or Headphone Jack of your external audio device.

Turn on the unit and external audio device.

Tap the FUNCTION Button on main repeatedly or AUX IN Button on the remote control to

select AUX mode, "AUDIO IN" icon turns on, display shows the current time.

The volume level can now be controlled through the main unit. Operate all other functions on

the auxiliary device as usual.

Note:



If you connect this unit to the Line-Out Jack of your external device then you only need to

adjust the volume control of this unit. If you connect the Headphone Jack of your external

device then you may need to adjust both the volume controls of your external device and this

unit to obtain the desirable volume setting.