Bluetooth Operation - Jensen JWM9ABK Installation And Operation Manual

BLUETOOTH OPERATION

The JWM9A includes built-in Bluetooth technology that allows you to connect this head unit to
Bluetooth-enabled devices for streaming audio playback.
About Bluetooth Technology
Bluetooth wireless technology is a short-range wireless radio protocol. Operating in
the 2.4 GHz range, it transmits audio and data at speeds up to 2.1 Mbit/s over a
range of up to 10 meters.
Bluetooth Menu Options
NOTE: Please note that some Bluetooth menu options are only available while the unit is
in Bluetooth Audio mode.
Press and hold the MENU button (11) to enter menu adjustment mode. Repeatedly press the
>>| or |<< buttons (14, 13) or MENU button to access the "Bluetooth Device" menu. The
following menu options are available when the unit is in Bluetooth mode.
Use >>| or |<< to
Navigate the List
Press Enter
BT Device
Device 1
...
Connect/Disconnect
...
...
Device 5
Connect/Disconnect
Press Enter
Device 1
Device 2
Device 3
Device 4
Device 5
Lock/Unlock
Delete
Lock/Unlock
Delete

Bluetooth Pair <ENTER>: Press and hold the ENTER buttons to start pairing with a
Bluetooth enabled device.

Bluetooth Device: Press the ENTER button to view a list of previously paired mobile
devices models. Press the >>| or |<< buttons to view devices from the list. You cannot
delete a device that is actively connected. Press the ENTER button to select the device.
Press the >>| or |<< button to choose Lock/Unlock, Disconnect or Delete for this device.

LOCK/UNLOCK: The JWM9A can store up to 5 devices for Bluetooth connection.
The devices are stored in FIFO (First In First Out) order. To prevent a device from
being bumped from the list when more than 5 devices are used, you must lock the
device. To Lock/Unlock a device, press the ENTER to change Lock or Unlocked.

DISCONNECT: To disconnect a paired device, press the ENTER button to
temporarily remove the Bluetooth link. The link can be re-established through your
phone menu by selecting the JWM9A for connection.

DELETE: To delete a device from the list, press the ENTER button.
Pairing a Bluetooth Device
Before you begin, consult the owner's manual for the Bluetooth device you want to pair with the
JWM9A.
1. Make sure the device you intend to pair with is powered on and Bluetooth is enabled. With
the JWM9A in Bluetooth Audio mode, press and hold the ENTER button for 3 seconds to
start Bluetooth pair. The JWM9A will display 'Pairing' and is now ready to pair. With the
Bluetooth function of the mobile device turned on, search for a Bluetooth device.
2. When the Bluetooth device has completed its search, the mobile device will display the
Bluetooth device name (JWM9A).
3. Select JWM9A. The BT AUDIO icon (
4. Enter the pairing password (0000), if requested.
After connecting successfully, you will be able to listen to audio from your Bluetooth enabled
device through the JWM9A.
Bluetooth Audio (A2DP)
The A2DP music is available for Bluetooth enabled phones when the phone is connected. To
access Bluetooth mode and play songs stored in your phone, press the SOURCE button (10)
until Bluetooth mode is selectable. Press ENTER (12) to enter the Bluetooth mode.
While in Bluetooth mode, the Bluetooth icon (
illuminated on the LCD.
Selecting Tracks
During playback, press the >>| or |<< button (14, 13) to play the previous or next track.
Pausing Playback
During playback, press the || button (2) to pause the Bluetooth audio playback. "BT AUDIO
PAUSE" will appear on the LCD. Press || button again to resume playback.
If you change to another mode, the mobile device audio will pause. Press the SOURCE button
15
JWM9A
) on the radio LCD will be displayed.
) and the Bluetooth Audio icon ( ) will be