Jensen JBS-300 User Manual page 18


Press the POWER/ STANDBY BUTTON on top of the main unit or on the remote control to
turn the unit OFF the unit when you have finished listening. Don't forget to switch off the power
of your external device as well.
This unit provides 4 different EQ modes to enhance your listening experience. You can select the
desired effect by pressing the EQ Button on remote control repeatedly at following sequence:

Press the MUTE Button on remote control to mute the sound output from the speaker
temporarily. The "MUTE" icon will appear in display.

Press the MUTE Button again or VOLUME+/- Button to resume to normal speaker playback.
X-BASS BUTTON (REMOTE CONTROL ONLY)
Press the X-BASS button on remote control if you want to enhance the bass when listening to the
system, "X-BASS" icon will appear in display. Press the button again to turn off extra bass effect;
"X-BASS" icon will disappear in display.
SLEEP OPERATIONS (REMOTE CONTROL ONLY)
The sleep timer allows you to turn the unit off after a designated time is reached.
1. To activate the sleep timer, turn the unit on and tap the FUNCTION button on main unit
repeatedly or direct function mode buttons on the remote control to select AM, FM radio, CD,
USB, Bluetooth or listening to music via AUDIO IN
2. Tap the SLEEP button on remote control, the sleep time icon
3. Repeatedly tap the SLEEP button to select a sleep time. The unit will turn off after 10, 20, 30,
40, 50, 60, 70, 80 or 90 minutes. Wait for 3 seconds after your selection for the unit to confirm
the selection, the unit will play for the selected length of time then automatically turn off.
4. To cancel the sleep timer, tap the SLEEP button repeatedly until timer shows "00", the sleep
time icon disappears on the display
5. To turn the unit off before the selected length of time, press the STANDBY-ON
time.
Notes:
1.) To check the remaining sleep time, tap the SLEEP button once.
2.) If you are falling asleep to music from an external device connected to the AUX input, the
sleep timer will shut off the power to this system but it will not turn off the external device.
SNOOZE OPERATIONS (REMOTE CONTROL ONLY)
SNOOZE FUNCTION
1. Should you wish to delay the alarm for 9 minutes you can activate the SNOOZE function.
2. When the alarm sounds, press the SNOOZE button to delay the alarm for 9 minutes.
3. After alarm off , the SNOOZE function will no longer operate.
If the system does not respond or has erratic operation, you may have experienced an
electrostatic discharge (ESD) or a power surge that triggered the internal computer to shut down
PRESET EQ (REMOTE CONTROL ONLY)
ROCK  CLASSIC  POPS  JAZZ  OFF
MUTE BUTTON (REMOTE CONTROL ONLY)
RESETTING
E-17
appears on the display.
button at any