Program Operation; Bluetooth Operation - Jensen CD-565 User Manual

12. To repeat a particular track, tap the REPEAT button once, the Repeat 1 indicator "
lights on the LCD DISPLAY.
13. To repeat the entire CD, tap the REPEAT button twice, the Repeat all indicator "
lights on the LCD DISPLAY.
14. To cancel Repeat Function, tap the REPEAT button until REPEAT indicator goes off from
LCD display.
15. To shuffle play the entire CD, tap the M+/RANDOM button, the random play indicator
"RAND" lights on the LCD DISPLAY. Tap the RAMDOM button again to cancel the shuffle
play if necessary.
16. To stop playing, tap the STOP
17. Tap the Button to turn the unit OFF.

PROGRAM OPERATION

This function allows the tracks to be played in a programmed sequence. Programs can be set
in STOP mode.
1. Tap the PROG/MEM button once. The "PROG" Indicator will flash and program Channel
Number "P01" will show briefly and then "00" flashing on the LCD DISPLAY.
2. Slightly rotate the TUNING CONTROL KNOB counterclockwise (TUN-
(TUN+ ) until you hear a "click" sound.
3. Rotate the TUNING CONTROL KNOB counterclockwise (TUN-
track, or clockwise (TUN+
selected to be programmed.
4. Tap the PROG/MEM button again to store selection. The program Channel Number will
change to "P02" briefly on the LCD DISPLAY and then "00" flashing to prompt for input
next program track.
5. Repeat steps 2 - 3 to program as many as 20 tracks.
6. Tap the PLAY/PAUSE
7. You may tap the REPEAT button repeatedly to select repeat 1 or all programmed tracks.
8. Tap STOP button once to stop playback.
9. Tap the PLAY/PAUSE
10. To cancel programmed play, press the STOP
PAIRING A SMARTPHONE OR BLUETOOTH ENABLED DEVICE
The Bluetooth feature enables you to stream and play the digital music on your Bluetooth
enabled device to your unit.
1. With the power ON, tap the SOURCE button repeatedly to select Bluetooth mode. The
Bluetooth indicator will light and "bt" will be flashing on the LCD display.
2. The unit will go into auto connection mode and search for a previously paired device that
is still active and in range (30 feet/10 meters). If found, a brief welcome melody will be
heard and "bt" indicator will stop flashing and remain on. If no active Bluetooth device is
found, the unit will switch to interactive pairing mode and the "bt" indicator will continue
flashing.
3. To establish a new link, turn on the Bluetooth function of your Bluetooth enabled device
and enable the search or scan feature to find "CD-565" in the list of discoverable
Bluetooth devices. Select the "CD-565" from your available device list when it appears on
its screen and a brief welcome melody will be heard if pairing and connection is
successful. If you are asked for a password, enter "0000".
button.
) to go UP a track.The LCD Display will indicate the track
button to start the programmed play.
button to resume programmed play.
button twice.

BLUETOOTH OPERATION

E10
"
ALL"
) or clockwise
) to go DOWN a