VTech Analog Next Gen Series User Manual page 19

Corded 1-line hotel telephone
Hide thumbs Also See for Analog Next Gen Series:
Table of Contents

Advertisement

Question
I cannot dial out.
The telephone does not ring when there is an
incoming call.
Suggestions
• Try all the above suggestions.
• Make sure there is a dial tone before
dialing.
• Eliminate any background noise. Mute the
telephone before dialing, if applicable, or
dial from another room in your unit with
less background noise.
• If other telephones in your hotel are
having the same problem, the problem
is in the wiring or telephone service.
Contact your telephone service provider
(charges may apply).
• Make sure the telephone line cord is
plugged in properly.
• If other telephones in your hotel are
having the same problem, the problem
is in the wiring or telephone service.
Contact your telephone service provider
(charges may apply).
• Test a working telephone at the
telephone wall jack. If another telephone
has the same problem, the problem is
in the telephone wall jack. Contact your
telephone service provider (charges may
apply).
• The telephone line cord may be defective.
Install a new telephone line cord.
EN - 19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ng-a3211

Table of Contents