Determining Which Temperature Control You Are Using; To Change The Desired Room Temperature - Daikin EWAA006D2V3P-H User Reference Manual

5 | Operation

5.6.3 Determining which temperature control you are using

5.6.4 To change the desired room temperature

User reference guide
28
4 Confirm the changes.
Example: Changeover restrictions
When
During cold season.
Example: October, November, December, January,
February and March.
During warm season.
Example: June, July and August.
In-between.
Example: April, May and September.
To determine which temperature control you are using (method 1)
Check the installer settings table filled in by the installer.
To determine which temperature control you are using (method 2)
You can see on the home screen which temperature control you are using.
a2
b
a1
a1 Heat emitter of the main zone (in this example Underfloor heating)
a2 Heat emitter of the additional zone (in this example Fancoil unit). If no icon is
displayed, there is no additional zone.
b Room thermostat type of the main zone:
If b=...
No icon
During room temperature control, you can use the room temperature setpoint
screen to read out and adjust the desired room temperature.
26 Jun 2020
18:19
12
25
22
20
Then the temperature control is...
Main zone
Room thermostat control External room thermostat
External room thermostat
control
Leaving water
temperature control
Restriction
Heating only
Cooling only
Reversible
Additional zone (if any)
control
Leaving water
temperature control
EWAA004~008D + EWYA004~008D
Packaged air-cooled water chillers
and packaged air to water heat pumps
4P688016-1A – 2022.09