Table of Contents
Advertisement
Installing the Tablet Mount
In the assembly kit
, there are M4 X 10 bolts (4) to install either the fans
(Installing the Fans with Tablet
Mount,
page 14) or the tablet mount.
1 Align the tablet mount
with the back of the display.
2 Use the M4 x 10 bolts
and the Torx 20 wrench to install the tablet mount.
3 Connect the display cable
to the port
.
4 Attach the clip and tablet
(Attaching Your Tablet to the Trainer,
page 16).
24
Device Information
Advertisement
Table of Contents
