Installing The Handlebar - Garmin TACX NEO BIKE PLUS Owner's Manual

Installing the Handlebar

Before you install the handlebar, see the topics on posture
E
(Adjusting the Trainer Geometry,
1 Open the assembly kit
2 Use the 6 mm hex key to remove the set screw.
3 Place the cap on the handlebar rail
4 Slide the handlebar onto the handlebar rail.
5 Adjust the handlebar reach, and secure the M12 x 25 handle
The maximum handlebar distance is 15 cm.
6 Use the 8 mm hex key to remove the set screw from the handlebar post.
12
page 3).
.
.
(Cycling Posture, page 2) and geometry
.
Tacx NEO Bike Plus Assembly Instructions