Table of Contents
Advertisement
Specifications
Power supply
Operating temperature
range
Storage temperature
range
Wireless frequency
Maximum rider weight
Device Care and Storage
See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
• Unplug the trainer when it is not in use.
• After every use, clean the aluminum disc on the right side of the trainer with a moist cloth, and dry it
thoroughly.
• Install the sweat cover
• Clean the saddle, handlebar, and pedals with a cloth and a mild cleaning solution.
• Clean the trainer before storing it.
• Use the small wheels on the back of the Tacx NEO Bike Plus trainer to move the trainer.
NOTE: You should stabilize and level the trainer after moving it.
• Check and firmly tighten the bolts, handles, and screws.
• Check the power cable and adapter for damage.
• Go to buy.garmin.com, or contact your Garmin dealer for information about optional accessories and
replacement parts.
• When you do not plan to use the trainer for several months, you should store the trainer in a cool, dry place
with temperatures around the typical household level
Device Information
Device Information
Use the included 48 Vdc 90 Watt power cable.
From 100 to 240 V
From 0º to 40ºC (from 32º to 104ºF)
From -20º to 60ºC (from -4º to 140ºF)
If the trainer is stored or shipped below this temperature range, allow the trainer to
normalize to the operating temperature range, and wait 12 hr. before use. Extreme
temperature changes can cause condensation inside the trainer that may result in
property damage.
2.4 GHz @ 0 dBm maximum
120 kg (265 lb.)
(Installing the Sweat Cover,
NOTICE
WARNING
page 25).
(Specifications,
page 23).
23
Advertisement
Table of Contents
