Installing The Antenna On The Group Ride Mount - Garmin TREAD Owner's Manual

6 Screw down and tighten the antenna
7 Route the antenna cable along a suitable path using the roll bars in your vehicle, and secure it using the
included zip ties.
8 Secure any loose cable to the roll bar using the included zip ties.
NOTE: you should avoid bundling loose cable behind body panels to reduce antenna interference.

Installing the Antenna on the Group Ride Mount

NOTE: the mounted antenna must be at least 4 cm (1.57 in.) away from the nearest roll bar or metal surface to
avoid radio interference.
For the best range performance, use the external antenna mount. You can mount the antenna directly onto the
Group Ride mount when it is not possible to use the external antenna mount
Screw down and tighten the antenna onto the Group Ride mount.
8
onto the external antenna mount plate.
(Mounting the Antenna, page 7).
Installation