Set Supervisor/User Password - MSI Axis 945GM User Manual

BIOS Setup
Set Supervisor/ User Password
W hen you select Load Optimized Defaults, a message as below appears:
Type the password, up to six characters in length, and press <Enter>. The
password typed now will replace any previously set password from CMOS
memory. You will be prompted to confirm the password. Retype the password
and press <Enter>. You may also press <Esc> to abort the selection and not
enter a password.
To clear a set password, just press <Enter> when you are prompted to enter
the password. A mes sage will show up conf irming the pass word will be
disabled. Once the password is disabled, the system will boot and you can
enter Setup without entering any password.
W hen a password has been set, you will be prompted to enter it every time you
try to enter Setup. This prevents an unauthorized person from changing any
part of your system configuration.
3-21