Table of Contents
Advertisement
M S-6417 Barebone
Integrated Peripherals
OnChip IDE Device
Press <Enter> and the following sub-menu appears:
On-Chip Serial ATA A
This setting is used to specify the SATA controller. The settings are:
[Disabled]
[Auto]
[Legacy Mode]
[Native Mode]
SATA PORT Speed Settings
This setting controls the speed of the SATA port.
3-12
Disable the SATA controller.
PATA and SATA will be arranged by BIOS,
and you will be able to see the IDE Device
status listed in Standard COMS Features.
PATA and SATA will be combined. Max. of 2
IDE drives in each channel are available.
PATA and SATA will both be enabled. Max. of
6 IDE drives are supported.
Advertisement
Table of Contents
