Table of Contents
Advertisement
M S-6417 Barebone
Memory
The mainboard provides two slots for 240-pins Dual Channel DDRII 533/
667 DIMM, which supports the memory size up to 4GB. Since DDRII modules are
not interchangeable with DDRI and the DDRII standard is not backward compatible,
you should always install DDRII memory module in the DDRII slot (DIMM1~DIMM2).
Otherwise, you are not able to boot up your system and your mainboard might be
damaged.
Installing DDRII Modules
1. The DDRII DIMM has only one notch on the center of module. The Module will
only fit in the right orientation.
2. Insert the DIMM memory module vertically into the DIMM slot. Then push it in
until the golden finger on the memory module is deeply inserted in the socket.
3. The plastic clip at each side of the DIMM slot will automatically close.
2-4
DIMM 1 (orange)
DIM M2 (green)
Volt
Notch
Advertisement
Table of Contents
