Jumper
The motherboard provides the following jumpers for you to set the computer's
function. This section will explain how to change your motherboard's function
through the use of jumpers.
Clear CMOS Jumper: CLR_CMOS1
There is a CMOS RAM on board that has a power supply from external
battery to keep the system configuration data. W ith the CMOS RAM, the system
can automatically boot OS every time it is turned on. If you want to clear the
system configuration, use the CLR_CMOS (Clear CMOS Jumper ) to clear data.
Follow the instructions below to clear the data:
CLR_CMOS1
Important
You can clear CMOS by shorting 2-3 pin while the system is
off. Then return to 1-2 pin position. Avoid clearing the CMOS
while the system is on; it will damage the mainboard.
3
1
1
Keep Data
Clear Data
Hardware Setup
3
2-13