Connectors
.
IDE Connector: IDE1
The mainboard has a 32-bit Enhanced PCI IDE and Ultra DMA 66/100 con-
troller that provides PIO mode 0~4, Bus Master, and Ultra DMA 66/100 function.
The connectors on the mainboard allows you to connect to the IDE devices: HDD
& CD-ROM.
Serial ATAII Connectors: SATA1/SATA2
SATA1/SATA2 are dual high-speed Serial ATAII interface ports. Each
supports data rates of 300MB/s. All connectors are fully compliant with Serial
ATA specification. Each Serial ATA connector can connect to 1 hard disk device.
7
SATA1/SATA2
IDE1
Pin Definition
PIN
SIGNAL
1
1
3
5
7
Hardware Setup
PIN
SIGNAL
2
TXP
GND
4
GND
TXN
6
RXP
RXN
GND
2-9