Chapter 1 Part Names - Mitsubishi Electric CC-Link IE Field NZ2GF12A-60IOLH8 User Manual

1
PART NAMES
Part names of the IO-Link module
This section describes part names of the IO-Link module.
(1)
(3)
(4)
(5)
(6)
(7)
No. Name
(1) FG screw hole
(2) Module fixing hole
(3) Communication
connectors
(4) Display part
(5) Power supply connectors
(6) IO-Link connectors
(7) Signal label fixing part
1 PART NAMES
14
(2)
Application
A hole for an FG screw
For the tightening torque of FG screws, refer to the following.
Page 36 Installation
This hole is used to fix the IO-Link module with a module mounting screw.
For the tightening torque of module mounting screws, refer to the following.
Page 36 Installation
P1 PORT1 connector for CC-Link IE Field Network
Connect an Ethernet cable. ( Page 38 Wiring of Ethernet Cable)
P2 PORT2 connector for CC-Link IE Field Network
Connect an Ethernet cable. ( Page 38 Wiring of Ethernet Cable)
Displays the IO-Link module station number, errors, and other information.
Use the [SET] and [SEL.] buttons for operations. ( Page 17 Operation specifications of the display part)
Connectors for the module/sensor power supply (US) (24VDC) and actuator power supply (UA) (24VDC).
Connectors for IO-Link communication
A ditch to fix supplied signal labels.