Timers - Lowrance GlobalMap Sport Installation And Operation Instructions Manual

TIMERS

The GlobalMap Sport™ has two timers built
in. One is a count-down timer and the other is
a count-up timer. The count-down timer counts
down from the time you put in to zero. The
count-up timer starts at zero and counts up to
the time you entered.
To set either timer, first switch to a screen that
is showing the timer that you want to use. Next,
press the MENU key, then move the black box
to the desired timer set menu. In this example,
we're setting the count-down timer. Now press
the right arrow key. A screen similar to the one
below appears.
Using the right and left arrow keys, move the
black box to the first number in the time that
you want to set. (The time is in hours, minutes,
and seconds) Now press the up or down ar-
row keys until the desired number shows. Con-
tinue until the time shown in the display is cor-
rect, then press the ENT key. The unit returns
to the navigation, mapping, or windows dis-
play.
To start the timer, press the MENU key, then
move the black box to the "Dn Timer STOP/
GO" label. Press the right arrow key to start
the timer. The timer continues counting until
you stop it. If you turn the up timer's alarm on
(press the right arrow key when the black box
is on the (Up ALM...Off/On label), it will sound
a tone when it reaches the time you entered in
the up timer set menu. Press the EXIT key to
silence the alarm.
28